Video Transcript for Comprehensive Review: Taylor Made Novelty Boat Flag

Hey everyone. I'm Ellen, here at etrailer.com, and we're going to be taking a quick look at this novelty flag from TailorMade. So, as the flag suggests, it's happy hour somewhere, so we can hang this on our boat to let other people know that the party has started, or just hang it in your den, in your bar area at home, really wherever you want to fly it.So inaudible 00:00:22 to make sure that this is going to be the right flag for you. It is made out of a nice, lightweight nylon material, so it's going to catch the wind easily, and also be pretty durable, as well. On the fly end, we'll have this reinforced stitching; it's going to be a four-needle stitch, so that's going to have four different stitches to keep that from fraying as it does fly in the wind. On our hoist end, we'll have our two grommets there, so we can attach that to our pole.

You can find those sold separately here at etrailer.com.The rough size is about 18" long, although with the hoist end, it is a little bit longer overall than that; it's about closer to 18 1/2", but from the center of where they would attach, it is about 18" by about 12 1/2". The flagpole and hardware are sold separately, but again, you can find a lot of options for that right here at etrailer.com, so check those out. One last measurement would be the diameter of those grommets on the inside; that's going to be 7/16 of an inch, so any hardware that fits into that 7/16 will be a good fit.I hope this has been helpful in deciding if this is going to be the right flag for you. Again, I'm Ellen, here at etrailer.com. Cheers..